邹丰楼,陈学艺,李杨,白京津,李松涛,赵德超.FTIR研究聚丙烯负载型催化剂的制备过程[J].分子催化,1999,(3):
FTIR研究聚丙烯负载型催化剂的制备过程
FTIR Study on the Preparation of Supported Catalyst for Propylene Polymerization
  
DOI:
中文关键词:  红外光谱分析  催化剂制备  结构锚定  XPS分析  钛含量  催化活性
英文关键词:IR spectrometry,Preparation of catalyst,Structure anchor,XPS analysis,\{Titaniun content,\} Catalytic activity
基金项目:
邹丰楼  陈学艺  李杨  白京津  李松涛  赵德超
北京燕山石化集团公司研究院
摘要点击次数: 1256
全文下载次数: 17
中文摘要:
      采用红外光谱跟踪分析用于丙烯聚合的MgCl2负载型催化剂的制备过程,阐明了制备过程中的主要化学变化.认为载体MgCl2含水对催化剂负载过程及钛含量有极大的影响;MgCl2的溶解是一经过中间过渡态的醇化过程;邻苯二甲酸酐不仅会与部分醇反应生成酯,而且还与水反应生成酸,起了除水的作用;其中酯在TiCl4负载中作为内酯,酸容易与-Mg—(OR)作用生成Mg(OH)2或Mg(OH)Cl;在负载过程中,TiCl4倾向于在MgCl2表面的结构缺陷处与MgCl2发生“结构锚定”.用红外光谱跟踪分析的结论,得到了用不同含水量MgCl2制得的催化剂钛含量和催化活性及XPS分析的支持
英文摘要:
      FTIR spectrometry was used to monitor the preparation of the MgCl2supported catalyst for propylene polymerization. It is found that water, introduced by the support\{ MgCl2,\} has great effect on the catalyst preparation and the titanium content. FTIR analysis also shows that the dissolution of MgCl2 is an alcoholization reaction through a transition state. Anhydrous phthalate reacts with both alcohol and water and produces ester and acid, respectively, which results in the elimination of water. The acid reacts easily with MgOR to form Mg(OH)2 or Mg(OH)Cl; while the ester acts as an internal ester produced in the TiCl4supporting system, in which TiCl4 is inclined to anchor MgCl2 on the surface by structural defects. The results from FTIR are confirmed by the results of XPS and the activity and titanium content of catalysts prepared with MgCl2 containing different water amounts.
HTML  查看全文  查看/发表评论  下载PDF阅读器